Physio-Control LIFEPAK CR2 Replacement Battery

Physio-Control LIFEPAK CR2 Replacement Battery – 4-Year Lithium AED Battery

The Physio-Control LIFEPAK CR2 Replacement Battery (11141-000165) is the official 4-year lithium battery designed exclusively for the LIFEPAK CR2 AED. This long-life battery provides reliable power for emergency cardiac response with FDA approval and a 4-year manufacturer’s warranty.

Part Number: 11141-000165
Battery Life: 4 years installed standby
Technology: Lithium Manganese Dioxide (LiMnO2)
Warranty: 4-year manufacturer warranty included

LIFEPAK CR2 Battery Compatibility & Specifications

Compatible AED Models

Primary Compatibility: The LIFEPAK CR2 replacement battery is designed exclusively for:

• Physio-Control LIFEPAK CR2 AED (all configurations)
• Stryker LIFEPAK CR2 AED (after Stryker acquisition)

Important Compatibility Note: This battery is NOT compatible with other LIFEPAK models including CR Plus, CR Express, LIFEPAK 1000, or LIFEPAK 15. Each LIFEPAK model requires its specific battery design.

Technical Specifications

Battery Performance:

• Technology: Lithium Manganese Dioxide (LiMnO2)
• Voltage: 12V DC nominal
• Capacity: High-energy density for extended operation
• Operating Life: 4 years installed in AED
• Shelf Life: 5 years unopened from manufacture date
• Operating Temperature: 0°C to 50°C (32°F to 122°F)
• Storage Temperature: -20°C to 60°C (-4°F to 140°F)

Performance Metrics:

• Shock Capacity: 300+ defibrillation pulses
• Continuous Operation: 16+ hours of monitoring
• Self-Test Support: Powers daily automated diagnostics
• Standby Current: Ultra-low power consumption design

Why Choose Genuine LIFEPAK CR2 Batteries?

Superior Reliability & Performance

Factory Calibration: Genuine LIFEPAK CR2 batteries are specifically calibrated for optimal performance with CR2 power management systems, ensuring accurate battery life monitoring and reliable operation.

4-Year Guaranteed Performance: Each battery includes a comprehensive 4-year warranty from Physio-Control/Stryker, guaranteeing reliable operation throughout the entire service life.

FDA Approved Quality: All LIFEPAK CR2 batteries meet strict FDA medical device standards and undergo rigorous quality control testing before shipment.

Advanced Power Management

Intelligent Monitoring: The CR2 battery communicates directly with the AED’s power management system, providing:

• Accurate charge level indication on AED display
• Low battery warnings with adequate advance notice
• Self-test power management optimizing battery life
• Temperature compensation for reliable operation

Extended Service Life: Advanced lithium technology provides consistent power delivery throughout the 4-year service life, unlike batteries that gradually lose capacity over time.

LIFEPAK CR2 Battery Installation & Maintenance

Professional Battery Replacement Process

Pre-Installation Preparation:

1. Verify battery compatibility – Ensure 11141-000165 part number
2. Check manufacture date – Use batteries within 5 years of production
3. Power down AED – Turn off device before battery replacement
4. Prepare workspace – Clean, dry environment for installation

Step-by-Step Installation:

1. Remove Old Battery:

• Open AED battery compartment per manual instructions
• Carefully disconnect battery connector (note orientation)
• Remove expired battery following proper disposal procedures
• Inspect compartment for cleanliness and damage

2. Install New LIFEPAK CR2 Battery:

• Remove new battery from protective packaging
• Connect battery cable to AED (ensure proper polarity)
• Secure battery in compartment (verify tight fit)
• Close battery compartment until fully latched

3. Verify Installation:

• Power on LIFEPAK CR2 AED
• Confirm self-test sequence completes successfully
• Verify battery status shows full charge
• Record installation date for maintenance tracking

Battery Maintenance Best Practices

Monthly Monitoring:

• Check AED status indicators – Ensure green ready light
• Verify battery display – Monitor charge level indication
• Listen for alerts – Address any audio warning signals
• Visual inspection – Check for physical damage or corrosion

Environmental Considerations:

• Temperature control – Store AED in recommended temperature range
• Humidity protection – Avoid exposure to excessive moisture
• Physical protection – Prevent drops or impacts to AED
• Clean environment – Keep AED and battery compartment clean

Replacement Scheduling:

• 4-year replacement cycle – Replace battery every 4 years maximum
• Low battery alerts – Replace immediately when warned
• Spare battery management – Keep backup battery available
• Documentation – Maintain battery replacement records